SMOKE PRO
TOTAL TECH

Only $1,095.00

High Performance Automotive EVAP Smoke Machines for Professional Leak Detection and Repair

• Compact Design

• Locates EVAP Leaks Using Pressure Decay or Flowrate

• Flow Control Valve

• Runs on Baby Oil (Mineral Oil USP)

• No Need for expensive Nitrogen
  

• Produces Thick Smoke

• One Year Warranty

• Made in the USA

Call Now to Order! 330-239-1647

or email
sales@aatecusa.com

Special Offer Only from AATECUSA

Buy the Smoke Pro Total Tech and receive a FREE copy of

"The Smoking Gun for OBD II Repairs"

This is a $90 Value free with purchase

AND a free membership in ATA member's only website which is filled with lots of technical info you won't easily find elsewhere!

The Total-Tech™ is the latest state of the art smoke machine and leak detector to date. Its patent pending design eliminates the need for expensive annual smoke fluid changes. The Total-Tech™ operates on Medicinal Mineral Oil, (Baby Oil) so the cost of operation is less than one cent per test. The Total-Tech is pressure regulated at 13 inches of water. This is the approved test pressure for the EVAP system. The Smoke Control Valve, found on Redline products, allows the technician the versatility to pinpoint a leak without the masking effect of excessive smoke. The Total-Tech™ provides the operator with a pressure gauge as well as a flowmeter. These components allow the technician to test any system using pressure decay in seconds, and to visually detect the rate of leakage. This sensitive flowmeter is designed to pass or fail an EVAP system in minutes. The Total–Tech’s™ compact design allows the unit to hang under the hood or chassis during testing. Machined from solid billet aerospace aluminum, the Total-Tech™ is made in America and warranted for one full year.

A complete accessory package comes with every Smoke Pro™ and includes:

1. Complete machine.
2. Exhaust cone adaptor.
3. 16 piece cap plug set.
4. Hand held halogen lamp.
5. EVAP service port adaptor.
6. Schrader valve removal tool.
7. 8 ounce bottle of Mineral Oil.

Specifications:

Height: 12” (15 3/8” with hook)
Width: 7 “
Depth: 5 1/2 inches
Weight: 7.17 lbs.
Ship weight: 13 lbs.
Power requirements: 12 volts D.C.
Power usage: 5 amps. 250 watts max
Output pressure: 13” of water. (0.032 bar)
Flow rate: Variable from 0-20 liters per minute.
Operating temperature range: 0 to 150 degrees F. (-17.8 to 65.6 C.)

1. What kind of leaks can a smoke machine find?

A smoke machine will effectively locate leaks in any system that contains air. Leaks commonly found in automobiles are rotted, broken or disconnected vacuum lines, leaking gaskets and fittings, cracked or broken plastic components, leaking diaphragms and seats, worn throttle shafts, leaking or cracked exhaust or intake manifolds, catalytic converters, under dash climate control and central locking system leaks, brake boosters, charcoal canisters, wind noise around doors and windows, even leaky headlamp and tail lamp housings to name just a few.

2. How is an EVAP smoke machine different than a regular smoke machine?

The EVAP system or Fuel Vapor Recovery System is very sensitive to pressure. Most of these systems allow only 15” of water column pressure or less.(approximately ˝ PSI ) Excessive pressure can damage sensitive components within these systems. A good EVAP machine should be pressure regulated at 15” of water or less. It should also have a pressure gauge to visually verify the output pressure of the machine. Leak determination in an EVAP system can be accomplished with flow comparison, using a flowmeter or pressure decay, locking out the system under pressure and reading the pressure decay on a pressure gauge. The Smoke Pro™ Total Tech incorporates all of these elements as well as the thickest smoke of any machine on the market today.

3. How long will the smoke oil last and how much will it cost me to replace it?

The Smoke Pro TM automotive series will perform approximately 500 tests on an 8 ounce bottle of medicinal mineral oil (baby oil). Baby oil can be purchased at any market or drug store for a few dollars.

4. Is high pressure better for finding leaks than low pressure?

Absolutely not! The slower the smoke is exiting the leak the easier it is to see the smoke. A machine that operates at 1˝ PSI is not nearly as effective as a machine that is operating at ˝ PSI. Since EVAP testing must be performed at 13 inches of water, (less than ˝ PSI) any machine that is regulated to this pressure is a better choice for general testing as well.

5. Is it necessary to use Nitrogen when testing an EVAP system?

It is not necessary to use Nitrogen to test an EVAP system with the Smoke Pro™. In fact, Ford Motor Company and Daimler Chrysler do not require Nitrogen for leak testing EVAP systems and have purchased thousands of smoke machines which operate on compressed air. Nitrogen cylinders are heavy, awkward and require special storage.

6. Is UV dye needed to find leaks with smoke?

NO! Simply look for the smoke and follow it to the leak.

7. What is the warranty period?

The Smoke Pro™ Total-Tech™ and the Smoke Pro™ Hound Dog™ are both covered by a one year limited warranty against material defects and workmanship.

8. Why should I purchase the Smoke Pro™ Total-Tech instead of another smoke machine.

There are many reasons to purchase The Smoke Pro™ over other machines. The Smoke Pro™ has a pressure gauge which allows the user to monitor the pressure in the system, assuring safe and accurate testing of the EVAP system. The Flow Control Valve on The Smoke Pro™ allows the user to control the amount of smoke exiting a leak, making the exact location easy to see. The Flow Control Valve also allows the user to lock out the system under test. This allows you to read the decay in pressure on the pressure gauge. The Smoke Pro™ uses pure mineral oil (baby oil) to produce smoke, unlike other machines that ask you to pay as much as $71.95 a bottle. Baby oil can be purchased at any drug store or market for a few dollars, and more importantly, it is safe to use. The Smoke Pro™ is made in America, it is machined from solid billet aerospace aluminum for a lifetime of service and best of all it is about half the price of our nearest competitor. The Smoke Pro™ is only sold through qualified representatives so that every customer receives the personal service they deserve.