Advanced Automotive Test Equipment
Co.
Our Tools Provide Peak
Performance Call
now 330-239-1647
Proud Sponsor of ATA
Check
out Home
|
Sales
|Service
Parts
|Emissions
| OBD
II
|
Scopes
|
A/C
| Fuel
Injection
|Fluid Exchange|
Training
|
| Service
| Signup
| MembersArea
| Contact
Us
|
ATA
| Links
| Funny Stuff |
|
Categories
|
|
Featured
Brands
|
|
and many
more!
|
Email
Ben Pearson Lifts
 |
 |
|
|
Ben Pearson - Model 12000-ALX(standard
design) |
We've put 10,000 Pounds of Lifting Power and American Made Quality Into the 10000SI.Quality made. Performance tested. When you invest in the Ben Pearson 10000SI you get both. Plus, a whole lot more. Features. Rugged durability. Every Ben Pearson 10000SI delivers all this and operator features that go beyond what's needed.
Call for Pricing |
| PART # | MODEL | DESCRIPTION | PRICE |
| 12000ALX | 12,000 lb. alignment w/ built in double slip plates & turntable cut-outs (Air Lock Release) (270" L X 20" W tracks) | Call for Pricing | |
| 12000ALX-E | 12,000 lb. alignment w/ built in double slip plates & turntable cut-outs (Air Lock Release) (301" L X 20" W tracks) | Call for Pricing |
Alignment lifts, and all different shapes and sizes, but only Ben Pearson's ALX Alignment Lift can deliver the power and durability you need every day to your shop. Every inch of the Ben Pearson ALX alignment is built tough. Tough enough to take all the wear and tear you can dished out. It's built to last. Plus, just like every Ben Pearson lift, it's American-made, that's your assurance that you're investing in a left that's Bill to deliver the performance you need no matter how hard you use it.
Our features make this lift your best investment.
When you invest in a Ben Pearson lift you'll always get the features you need to make your job easier. Operator convenience features. Safety features. Features that aren't added on, their built-in: Two independent slip plates, roller Jack ready, heavy-duty 20 inch tracks, multiple leveling positions, safety release system, high-strength tracks -- plus, you get a rock solid warranty and strong service support.
- Extra wide tracks enable this unit to lift a wide range of vehicles without lateral adjustment. Lateral adjustment is standard on all models.
- Bearings have grease fittings for easy maintenance
- Exclusive high strength track design limits twisting due to off center loads and gives extra stability to track jacks and jacking beams
- Chains for lifting and equalization give added safety and long life.
- Threaded adjustment for easy leveling
- Mechanical release safety system
- Extra heavy crossmember is for added stability and reduced deflection under load
- Completely self-contained hydraulic power unit with translucent tank for easy monitoring of fluid level
- Pressure relief valve to prevent overloading, and push-button operations for lifting
 |
Comes standard with a rail kits to accommodate optional rolling drain Pans or bridges/jacks |
 |
Convenient drive-on ramps double as safety pivot back-stops when lift is raised |
 |
Threaded adjustment for easy leveling. Leaf chain lifting system |
 |
Optional alignment radius plates. Zinc plated finish protects against rust and corrosion |
 |
Features two independent slip plates for two-wheel and four-wheel alignment |
Alignment Lift Specifications
| Specification | 12000AL | 12000AS | 12000AMR |
|---|---|---|---|
| Lifting Capacity | 12,000 lb | 12,000 lb | 12,000 lb |
| Max. Wheelbase 2 Wheel Align. | 192-7/8" | 184-3/8" | 185" |
| Min.-Max. Wheelbase 4 Wheel Align. | 81" to 168-1/2" | 81" to 168-1/2" | 81" to 168-1/2" |
| Alignment Heights Position | 17" - 29" - 411" - 53" | 17" - 29" - 411" - 53" | 17" - 29" - 411" - 53" |
| Lifting Height | 78" | 78" | 74-7/16" |
| Length Overall | 265-1/4" | 252-1/4" | 241-1/4" |
| Width Overall | 135-3/4" | 135-3/4" | 135-3/4" |
| Height Overall | 103" | 103" | 97-1/2" |
| Drive Thru Clearance | 116-1/2" | 116-1/2" | 116-1/2" |
| Between Columns Length | 167" | 167" | 120-3/8" |
| Height of Columns | 84-3/4" | 84-3/4" | 84-3/4" |
| Width of Track | 22" | 22" | 20" |
| Height of Track | 11-7/8" | 11-7/8" | 8-7/16" |
| Width between Tracks (max.) | 68" | 68" | 68" |
| Motor | 2 HP | 2 HP | 2 HP |
| Voltage 1ph (3ph optional) | 208/230 VAC | 208/230 VAC | 208/230 VAC |
| Approx. Lifting Speed (to full stroke) | 75 Sec. | 75 Sec. | 75 Sec. |
| Minimum Bay Side | 15' x 26'> | 15' x 25' | 15' x 25' |
All Rights Reserved
Home Sales Emissions OBD II Scopes A/C The CAT Training Service Members Contact Us ATA Links | Privacy | Sales & Return Policies
Contact the WebMaster | E-Mail AATEC at sales@aatecusa.com * Call now 330-239-1647
Webhosting by Lida Ray Technologies
www.lidaray.com
