AATEC - Call today
AATEC - Celebrating 20 Years

Advanced Automotive Test Equipment Co.

Our Tools Provide Peak Performance Call now 330-239-1647

Our Tools Provide Peak Performace!
Click to verify BBB accreditation and to see a BBB report.
AATEC - Proud Sponsor of the ATA
Proud Sponsor of ATA
Call now 330-239-1647

Home | Sales |Service Parts |Emissions | OBD II | Scopes | A/C | Fuel Injection |Fluid Exchange| Training |
| Service | Signup | MembersArea | Contact Us | ATA | Links | Funny Stuff |

Categories
Featured Brands
and many more!

mailto:sales@aatecusa.comEmail
sales@aatecusa.com

Check out the CAT!
The Cat Tester

Get Ready, Set, Go with

GoScope

  

Another AATEC exclusive!

Get the AATEC GoScope - a powerful, feature-rich two-channel oscilloscope is a great addition to your toolkit.

Powered by USB - connect the GoScope to any laptop or desktop PC with a single cable.

 
Ask about our exclusive OBD II Pro Plus with GoScope Combination. Now that’s a lot of power in a small packag
     
The included software provides a traditional scope interface along with auto measurements and the ability to store and export waveforms. The software also provides features not normally available in a stand-alone oscilloscope, in-cluding a function generator, a logic analyzer, a spectrum analyzer, a vector-scope, and more.
 

Features:

  
  • 2 input channels
  • 25 Msps Maximum Sample Rate
  • 20 Vpp maximum input range (-10 V to +10 V when DC-coupled)
  • 10-bit input resolution over either the entire 20 Vpp range, or selectable 10, 2, and 1 Vpp ranges.
  • 1x/10x selectable probes
  
 

Included Expansion Card Features:

  
 
  • External analog trigger with a -10 V to +10 V input range
  • 4-bit digital input and trigger
  • Arbitrary waveform generator with an 8-bit DAC and se-lectable -1.5 to 1.5 and 0 to 4.9 voltage ranges
  • 4-bit DAC for generating NTSC and PAL signals
 

Key Specifications:

  
 
  • Power requirements: USB powered
  • Communication: USB
  • Dimensions: 2.71 x 4.67 x 1.08 in (68.8 x 118.6 x 27.4 mm)
  • Operating temp range: +32 to +158 °F (0 to +70 °C)



© Copyright 2011,
All Rights Reserved

Home Sales Emissions OBD II Scopes A/C The CAT Training Service Members Contact Us ATA Links | Privacy | Sales & Return Policies

Contact the WebMaster | E-Mail AATEC at sales@aatecusa.com * Call now 330-239-1647

Webhosting by Lida Ray Technologies www.lidaray.com